Table of Contents
Advertisement
Figure 98. Installing a PCIe adapter
Step 4.
Connect the PCIe adapter cables. For more information on RAID adapter cable routing, see
"Internal cable routing" on page
After you finish
Proceed to complete the parts replacement, see
Power button with LED replacement
Follow this procedure to remove and install the power button with LED.
Remove the power button with LED
Follow this procedure to remove the power button with LED.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
ThinkSystem ST50 V2 Maintenance Manual
126
19.
"Complete the parts replacement" on page
158.
Advertisement
Table of Contents
