Figure 52. Installing the 3.5-inch drive cage to the optical drive cage
After you finish
1. Reinstall the optical drive cage, see
2. Complete the parts replacement, see
Optical drive and drive cage replacement
Follow this procedure to remove and install an optical drive and optical drive cage.
Remove an optical drive
Follow this procedure to remove an optical drive.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
• Read
"Safety inspection checklist" on page iv
work safely.
ThinkSystem ST50 V2 Maintenance Manual
70
"Install the optical drive cage" on page
"Complete the parts replacement" on page
and
"Installation guidelines" on page 41
78.
158.
to ensure that you