Table of Contents
Advertisement
Figure 54. Removing optical drive retainer
Step 4.
(Optional) Pull the optical drive bezel away to remove it from the optical drive.
Figure 55. Removing the optical drive bezel
After you finish
1. Install a new optical drive, see
2. If no optical drive is to be installed, install the optical drive bay shield back to front bezel.
a.
Engage the bottom of the shield to the opening on the front bezel.
b.
Pivot the shield towards the front bezel until it snaps into place.
ThinkSystem ST50 V2 Maintenance Manual
72
"Install an optical drive" on page 73
Advertisement
Table of Contents
