Nortel AccessNode 2016 User Manual page 183

Table 6-20 (continued)
Optional 100 Amp power pedestals and accessories
CPC
A0784389 Voltage surge arrestor for AN2016, ac load center in AC compartment
Note 1: Order if power pedestal is not equipped with Surge arrestor.
Note 2: Order if power pedestal is located more than five feet away from
the AN2016 cabinet.
Table 6-21
modules for the AN2016 Cabinet.
Table 6-21
Optional optical patchcord and protector modules
CPC PEC
A0365303 NT7E46BA
A0351099 NT7E46CA
A0408374 NT7E46FA
Note 1: Provide two NT7E46BA, CA OR FA depending of connector type per Optical circuit pack
provided in the AN ABM shelf, when connecting to a fiber manager kit NTNR34AA.
Note 2: Length of 5 meter, MVOA is not required.
A0358876 NT7E47BA
A0358877 NT7E47CA
A0408379 NT7E47FA
Note 1: Provide two NT7E47BA, CA OR FA depending of connector type per Optical circuit pack
provided in the AN ABM shelf, when connecting to a fiber manager with MVOA required.
Note 2: Length of 5 meter, MVOA is provided.
A0341959 303M-11A1GO Protector module VF 5 pins gold plated, black, solid
A03411961 303M-11A1TO
A0353718 303M-12A1TA
Note: Provide one per VF: 672 for 7 CDS, 864 for 9 CDS, 1344 for 14 CDS and 2016 for 21 CDS.
Description
—end—
lists the optional optical patchcord assemblies and protector
Description
Optical patchcord cable assembly, FC-FC type
Optical patchcord cable assembly, ST-ST type
Optical patchcord cable assembly, SC-SC type
Optical patchcord cable assembly, FC-FC type
Optical patchcord cable assembly, ST-ST type
Optical patchcord cable assembly, SC-SC type
state OVP, 300 V
Protector module VF 5 pins tin plated, black, less heat
coils
Protector module VF 5pins tin plated, solid state, 350
mA heat coils
—continued—
Ordering information 6-47
User Guide Rel 1.0 Standard May 1999
Quantity
1
Quantity
2
2
2
2
2
2
1 per VF line
see Note
1 per VF line
see Note
1 per VF line
see Note