Performing A Print Test - Kodak i1840 User Manual

Performing a Print test

A-61555 March 2007
Downloaded from www.Manualslib.com
The print test checks to be sure the ink jets in the Enhanced Printer are
working properly.
1. Touch Print Test. The Print Test screen will be displayed.
2. Place a blank sheet(s) of paper in the input elevator.
3. Touch OK. The document(s) in the output tray will display the results
of the print test.
4. Remove the document(s) from the output tray and evaluate the
appearance of the test pattern.
• If the pattern is complete, you are ready to begin.
• If the pattern is not legible:
−
−
5. Touch End Job to return to the Idle screen.
manuals search engine
Check to see that the print cartridge is installed properly.
Repeat the print test. See Chapter 4, Using the Enhanced
Printer and Patch Readers.
If the pattern is still not legible, replace the ink cartridge.
3-31