Table of Contents
Advertisement
Software No. display
The software No. (of the inverter whose constants stored in the digital
operator are read out) is displayed.
[Example] Display the software No. of the inverter whose constants
stored in EEPROM inside the digital operator
• Enable the setting for the
constans n01 to n79.
• Execute Software No. Display
(Sno)∗ by Constant copy
function selection (n76).
∗ Displays Lower 3 digits of the software version.
82
Explanation
• Press DSPL to light [PRGM].
• Press ENTER to display the
set value.
• Change the set value to 4 by
Pressing
or
v
• Press ENTER.
• Change the constant No. to
n76 by pressing
• Press ENTER to display the
set value.
• Change the set value to Sno by
pressing
or
v
• Press ENTER.
• Press DSPL or ENTER.
Operator display
N01
(Can be a different constant No.)
0 (Lit)
(Can be a different set value.)
1 (Blinks)
key.
1 (Lit for one second)
↓
N01 (The constant No. is
displayed)
N76
v
or
key.
DY (Lit)
SNO (Lit)
key.
011 (Lit)
(software version : VSP020011)
N76 (The constant No. is
displayed)
Advertisement
Table of Contents
