Yamaha FJR 1300 AE 2014 Service Manual page 623

ELECTRONICALLY ADJUSTABLE SUSPENSION SYSTEM
EAS2PD1014
TROUBLESHOOTING METHOD (SCU)
TIP
• If there is a malfunction in the electronically ad-
justable suspension system, the damping
force adjusting function "1" will be displayed in
the function display, the electronically adjust-
able suspension system warning light "2" will
come on, and a fault code number "3" will be
displayed.
• Fault code numbers for the electronically ad-
justable suspension system are not displayed
together with the fault code numbers for other
systems. Therefore, fault code numbers for
other systems may be displayed after the mal-
functions in the electronically adjustable sus-
pension system are repaired. If there are
malfunctions in other systems, refer to the trou-
bleshooting sections for the systems indicated
by the warning lights.
4. Multi-function meter center display
5. Multi-function meter right display
The electronically adjustable suspension
system warning light come on.
1. Check:
• Fault code number
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Check the fault code number displayed on
the multi-function meter right display.
b. Identify the faulty system with the fault code
number.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
2. Check and repair the probable cause of the
malfunction.
Refer to "TROUBLESHOOTING DETAILS
(SCU)" on page 8-173 and "SELF-DIAG-
NOSTIC FUNCTION AND DIAGNOSTIC
CODE TABLE (SCU)" on page 9-14.
1
GEAR
N
93
4 2 5 3
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
3. Perform the reinstatement action for the elec-
tronically adjustable suspension system.
Refer to "Confirmation of service completion"
in the appropriate table in "TROUBLE-
SHOOTING DETAILS (SCU)" on page
8-173.
4. Turn the main switch to "OFF" and back to
"ON", then check that no fault code number is
displayed.
TIP
If another fault code number is displayed, repeat
steps (1) to (4) until no fault code number is dis-
played.
5. Erase the malfunction history in the diagnos-
tic mode (code No. 62). Refer to "SELF-DI-
AGNOSTIC FUNCTION AND DIAGNOSTIC
CODE TABLE (SCU)" on page 9-14.
TIP
Turning the main switch to "OFF" will not erase
the malfunction history.
▼▼▼
▲▲▲
8-172