Yamaha FJR 1300 AE 2014 Service Manual page 490

a
b
a. Diagnostic code number increases.
b. Diagnostic code number decreases.
8. Check the operation of the sensor or actuator.
• Sensor operation
The data representing the operating conditions of the sensor appears on the multi-function meter
right display.
• Actuator operation
To operate the actuator, set the start/engine stop switch from"
TEM)
To operate the actuator, simultaneously press the "TCS" button and "RESET" button for approxi-
mately 2 seconds. (ELECTRONICALLY ADJUSTABLE SUSPENSION SYSTEM)
9. Turn the main switch to "OFF" to cancel the diagnostic mode.
TIP
Information about each diagnostic code number is organized in this manual as follows:
• If a diagnostic code number has a corresponding fault code number, the information is shown in
"TROUBLESHOOTING DETAILS (ECU)". (Refer to "TROUBLESHOOTING DETAILS (ECU)" on
page 8-41.)
• If a diagnostic code number does not have a corresponding fault code number, the information is
shown in "DIAGNOSTIC CODE TABLE". (Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAG-
NOSTIC CODE TABLE (ECU)" on page 9-5 and "SELF-DIAGNOSTIC FUNCTION AND DIAGNOS-
TIC CODE TABLE (SCU)" on page 9-14.)
10.Connect the wire harness coupler to the fuel pump. (except for electronically adjustable suspension
system)
EAS1MC1036
YAMAHA DIAGNOSTIC TOOL
This model uses the Yamaha diagnostic tool to identify malfunctions.
For information about using the Yamaha diagnostic tool, refer to the operation manual that is included
with the tool.
Yamaha diagnostic tool
90890-03215
Features of the Yamaha diagnostic tool
You can use the Yamaha diagnostic tool to identify malfunctions quicker than with conventional meth-
ods.
By connecting the adapter interface, which is connected to the USB port of a computer, to a vehicle's
ECU using the communication cable, you can display information that is necessary for identifying mal-
functions and for maintenance to display on the computer. The displayed information includes the sen-
sor output data and information recorded in the ECU.
FUEL INJECTION SYSTEM
DIAG
DIAG
DATA
" to "
8-39
01
15
". (FUEL INJECTION SYS-