Yamaha FJR 1300 AE 2014 Service Manual page 555

Fault code No.
Item
7 Defective cruise control
switch.
8 Malfunction in ECU.
EAS1MC1018
[B-2] DIAGNOSIS USING THE MALFUNCTION HISTORY CODES
Execute the diagnostic mode (code No. 61) to check the malfunction history.
• Refer to "DIAGNOSTIC MODE (ECU)" on page 8-38.
• Malfunction history is displayed in the multi-function meter unit right display. [B-3]
• Malfunction history is not displayed in the multi-function meter unit right display. [B-4]
EAS1MC1019
[B-3] MALFUNCTION HISTORY IS DISPLAYED
1. Information for the fault codes.
Refer to "TROUBLESHOOTING DETAILS (ECU)" on page 8-41.
EAS1MC1020
[B-4] MALFUNCTION HISTORY IS NOT DISPLAYED
Use the Yamaha diagnostic tool to check whether automatic deactivation history for the cruise control
system exists.
1. There is automatic deactivation history for the cruise control system.
• Explain the conditions for automatically deactivating the cruise control system to the customer.
• For information about the conditions for automatically deactivating the cruise control system.
Refer to "OUTLINE OF THE CRUISE CONTROL SYSTEM" on page 1-6.
TIP
If you do not have a Yamaha diagnostic tool, the automatic deactivation history cannot be checked.
Therefore, explain the automatic deactivation function of the cruise control system to the customer and
explain that this is not a malfunction.
EAS1MC1022
[C-1] DELETING THE FAULT CODES
1. Setting the diagnostic mode.
Refer to "DIAGNOSTIC MODE (ECU)" on page 8-38.
2. Execute the diagnostic mode (code No. 62) to erase the malfunction history in the diagnostic mode.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
EAS1MC1023
[C-2] FINAL CHECK
1. Check the brake lever and brake pedal operation.
91
Cruise control setting switch "RES+": open or short circuit is de-
A
tected.
Cruise control setting switch "SET–": open or short circuit
B
is detected.
Replace the left handlebar
switch.
Replace the ECU.
Refer to "REPLACING THE
ECU (engine control unit)" on
page 8-196.
8-104
CRUISE CONTROL SYSTEM
Turn the main switch to "ON".
Push the "RES+" side and
"SET–" side of the cruise
control setting switch.
Fault code number is not dis-
played → Service is finished.
Fault code number is dis-
played → Go to item 8.