2. Check the rear brake light switches.
Refer to "ADJUSTING THE REAR BRAKE LIGHT SWITCH" on page 3-30.
3. Execute the diagnostic mode (code Nos. 82 and 83) to check the operation of the front brake light
switch, rear brake light switch, clutch switch, and grip cancel switch.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
4. Execute the diagnostic mode (code Nos. 80 and 81) to check the operation of the cruise control set-
ting switch.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
5. Delete the fault codes.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
6. Check the operation of the cruise control system.
Test ride the vehicle and confirm that the cruise control system is operating normally.
CRUISE CONTROL SYSTEM
8-105