Yamaha FJR 1300 AE 2014 Service Manual page 262

1
3. Lubricate:
• Inner tube outer surface
Recommended oil
Suspension oil 01 or equivalent
4. Install:
• Dust seal "1" New
New
• Oil seal clip "2"
New
• Oil seal "3"
• Washer "4"
(onto the inner tube)
ECA2PD1013
NOTICE
Make sure the numbered side of the oil seal
faces bracket side.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
4
3
2
New
1
5. Install:
• Outer tube
(onto the inner tube)
6. Install:
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01502
Fork seal driver (48)
YM-A0948
Fork seal driver attachment
90890-01503
2
1
7. Install:
• Oil seal clip "1"
TIP
Adjust the oil seal clip so that it fits into the outer
tube groove.
1
8. Install:
• Dust seal "1"
(with the fork seal driver weight "2")
4-85
FRONT FORK