Yamaha FJR 1300 AE 2014 Service Manual page 384

Recommended lubricant
Engine oil
2. Apply:
• Sealant
(onto the crankcase mating surfaces and oil
baffle plate 2)
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215®)
TIP
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2–3 mm
(0.08–0.12 in) of the crankshaft journal bearings.
A
B
A. Upper crankcase
B. Lower crankcase
a. Apply two coats of sealant to the area shown
in the illustration.
3. Install:
• Dowel pins
4. Set the shift drum assembly and transmission
gears in the neutral position.
5. Install:
• Lower crankcase "1"
(onto the upper crankcase "2")
ECA13980
NOTICE
Before tightening the crankcase bolts, make
sure the transmission gears shift correctly
when the shift drum assembly is turned by
hand.
6. Install:
• Crankcase bolts
5-81
CRANKCASE
a
1
2