Change Your Password; Saving Your Configuration; Switch Lockout; Figure 17 Change Administrator Login Password - ZyXEL Communications XGS-4528F User Manual

Chapter 4 The Web Configurator

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.

Figure 17 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the Switch's power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch's storage that
remains even if the Switch's power is turned off.
Use the Save link when you are done with a configuration session.

4.5 Switch Lockout

You could block yourself (and all others) from using in-band-management (managing through
the data ports) if you do one of the following:
1 Delete the management VLAN (default is VLAN 1).
2 Delete all port-based VLANs with the CPU port as a member. The "CPU port" is the
management port of the Switch.
3 Filter all traffic to the CPU port.
4 Disable all ports.
5 Misconfigure the text configuration file.
58
XGS-4528F User's Guide