Enabling Rip - ZyXEL Communications XGS-4528F User Manual

5.1.5 Enabling RIP

To exchange routing information with other routing devices across different routing domains,
enable RIP (Routing Information Protocol) in the RIP screen.
1 Click IP Application and RIP in the navigation panel.
2 Select Both in the Direction
field to set the Switch to
broadcast and receive
routing information.
3 In the Version field, select
RIP-1 for the RIP packet
format that is universally
supported.
4 Click Apply to save your changes back to the run-time memory. Settings in the run-time
memory are lost when the Switch's power is turned off.
XGS-4528F User's Guide
Chapter 5 Initial Setup Example
EXAMPLE
65