Table 6 Navigation Panel Links - ZyXEL Communications XGS-4528F User Manual

Chapter 4 The Web Configurator
The following table describes the links in the navigation panel.

Table 6 Navigation Panel Links

LINK
Basic Settings
System Info
General Setup
Switch Setup
IP Setup
Port Setup
Advanced Application
VLAN
Static MAC
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth
Control
Broadcast Storm
Control
Mirroring
Link Aggregation This link takes you to screen where you can logically aggregate physical links to
Port
Authentication
Port Security
Classifier
Policy Rule
Queuing Method
VLAN Stacking
Multicast
56
DESCRIPTION
This link takes you to a screen that displays general system and hardware
monitoring information.
This link takes you to a screen where you can configure general identification
information and time settings for the Switch.
This link takes you to a screen where you can set up global Switch parameters
such as VLAN type, MAC address learning, IGMP snooping, GARP and priority
queues.
This link takes you to a screen where you can configure the IP address, subnet
mask (necessary for Switch management) and DNS (domain name server) and set
up to 64 IP routing domains.
This link takes you to screens where you can configure speed, flow control and
priority settings for individual Switch ports.
This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup menu). You can also
configure a protocol based VLAN or a subnet based VLAN in these screens.
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to
prevent network loops.
This link takes you to screens where you can cap the maximum bandwidth allowed
from specified source(s) to specified destination(s).
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure IEEE 802.1x port
authentication as well as MAC authentication for clients communicating via the
Switch.
This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port.
This link takes you to a screen where you can configure the Switch to group
packets based on the specified criteria.
This link takes you to a screen where you can configure the Switch to perform
special treatment on the grouped packets.
This link takes you to a screen where you can configure queuing with associated
queue weights for each port.
This link takes you to a screen where you can activate and configure VLAN
stacking.
This link takes you to screen where you can configure various multicast features
and create multicast VLANs.
XGS-4528F User's Guide