Figure 57 Advanced Application > Spanning Tree Protocol > Status: Mstp; Table 32 Advanced Application > Spanning Tree Protocol > Status: Mstp - ZyXEL Communications XGS-4528F User Manual

Chapter 11 Spanning Tree Protocol
This screen is only available after you activate MSTP on the Switch.
Figure 57 Advanced Application > Spanning Tree Protocol > Status: MSTP
The following table describes the labels in this screen.
Table 32 Advanced Application > Spanning Tree Protocol > Status: MSTP
LABEL
Configuration
CST
Bridge
Bridge ID
Hello Time
(second)
Max Age (second)
124
DESCRIPTION
Click Configuration to specify which STP mode you want to activate. Click MSTP
to edit MSTP settings on the Switch.
This section describes the Common Spanning Tree settings.
Root refers to the base of the spanning tree (the root bridge). Our Bridge is this
Switch. This Switch may also be the root bridge.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC
address. This ID is the same for Root and Our Bridge if the Switch is the root
switch.
This is the time interval (in seconds) at which the root switch transmits a
configuration message.
This is the maximum time (in seconds) a switch can wait without receiving a
configuration message before attempting to reconfigure.
XGS-4528F User's Guide