Figure 9 Transceiver Installation Example; Figure 10 Installed Transceiver; Figure 11 Opening The Transceiver's Latch Example; Figure 12 Transceiver Removal Example - ZyXEL Communications XGS-4528F User Manual

Figure 9 Transceiver Installation Example

2 Press the transceiver firmly until it clicks into place.
3 The Switch automatically detects the installed transceiver. Check the LEDs to verify that
it is functioning properly.

Figure 10 Installed Transceiver

3.1.3.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1 Open the transceiver's latch (latch styles vary).

Figure 11 Opening the Transceiver's Latch Example

2 Pull the transceiver out of the slot.

Figure 12 Transceiver Removal Example

XGS-4528F User's Guide
Chapter 3 Hardware Overview
45