Figure 28 Basic Setting > Ip Setup; Table 12 Basic Setting > Ip Setup - ZyXEL Communications XGS-4528F User Manual

Chapter 7 Basic Setting
Figure 28 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 12 Basic Setting > IP Setup
LABEL
Default
Gateway
Domain Name
Server
Default
Management
Management IP Address
Use these fields to set the settings for the out-of-band management port.
IP Address
IP Subnet
Mask
Default
Gateway
80
DESCRIPTION
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send packets
originating from itself (such as SNMP traps) or packets with unknown source.
Select Out-of-band to have the Switch send the packets to the management port
labelled MGMT. This means that device(s) connected to the other port(s) do not
receive these packets.
Select In-Band to have the Switch send the packets to all ports except the
management port (labelled MGMT) to which connected device(s) do not receive
these packets.
Enter the out-of-band management IP address of your Switch in dotted decimal
notation. For example, 192.168.0.1.
Enter the IP subnet mask of your Switch in dotted decimal notation, for example,
255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example, 192.168.0.254
XGS-4528F User's Guide