Configuring Ospf; Ospf Status; Figure 120 Ospf Router Election Example - ZyXEL Communications XGS-4528F User Manual

Figure 120 OSPF Router Election Example

You can assign a priority to an interface which determines whether this router will be elected
to be a DR or BDR. The router with the highest priority becomes the DR, while a router with a
priority of 0 does not participate in router elections. In
a priority of 0 to routers B and C, thereby ensuring they do not become DR or BDR and assign
a priority of 1 to router A to make sure that it does become the DR.

28.1.5 Configuring OSPF

To configure OSPF on the
1 Enable OSPF
2 Create OSPF areas
3 Create and associate interface(s) to an area
4 Create virtual links to maintain backbone connectivity.

28.2 OSPF Status

Use this screen to view current OSPF status. Click IP Application > OSPF in the navigation
panel to display the screen as shown next. See
on OSPF.
XGS-4528F User's Guide
, do the following tasks
Switch
Section 28.1 on page 231
Chapter 28 OSPF
Figure 120 on page 233 you can assign
for more information
233