Disassemble The Lcd Module - Lenovo V14 Gen 4 i Hardware Maintenance Manual

"Remove the fan (for Lenovo V14 G4 AMN)" on page 44
"Remove the I/O board" on page 45
"Remove the I/O board cable" on page 46
"Remove the touchpad board cable" on page 47
"Remove the system board" on page 48
"Remove the LCD module" on page 50
Go to https://support.lenovo.com/partslookup
part:
Upper case

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
Remove the LCD bezel
Make sure the following unit has been removed.
"Remove the LCD module" on page 50
Step 1. Remove the LCD bezel.
Figure 33. Remove the LCD bezel
Go to
https://support.lenovo.com/partslookup
part:
LCD bezel
Remove the hinges
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 50
"Remove the LCD bezel" on page 52
Step 1. Remove six screws and then remove the hinges.
52
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement