Remove The Battery Pack (For Models Without Hdd); Remove The Solid-State Drive (Ssd) Module - Lenovo V14 Gen 4 i Hardware Maintenance Manual

Screw specifications
M2 x L5
Go to https://support.lenovo.com/partslookup
part:
Battery pack

Remove the battery pack (for models without HDD)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 95
Step 1. Remove six screws and then remove the battery pack.
Figure 112. Remove six screws and then remove the battery pack
Screw specifications
M2 x L5
Go to
https://support.lenovo.com/partslookup
part:
Battery pack

Remove the solid-state drive (SSD) module

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 95
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw.
98
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part number of the following replacement
Number of screws
2
to look up the Lenovo part number of the following replacement