Disassemble The Lcd Module; Remove The Lcd Bezel; Remove The Hinge Cover - Lenovo 82RB Hardware Maintenance Manual

"Remove the Wi-Fi card" on page 37
"Remove the memory module" on page 38
"Remove the DC-in bracket" on page 39
"Remove the thermal module" on page 39
"Remove the CMOS battery" on page 40
"Remove the I/O board" on page 41
"Remove the system board and the I/O board cable" on page 42
"Remove the strip cover" on page 44
"Remove the LCD module" on page 45
Go to https://support.lenovo.com/partslookup
part:
Upper case (with touchpad, keyboard, waterproof breath film and antenna cables)

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.

Remove the LCD bezel

Make sure the following unit has been removed.
"Remove the LCD module" on page 45
Step 1. Remove the LCD bezel.
Figure 32. Remove the LCD bezel
Go to
https://support.lenovo.com/partslookup
part:
LCD bezel

Remove the hinge cover

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the LCD bezel" on page 47
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
47