Screw specifications
M2 x L6
M2 x L4
Step 3.
Pry up the latches and then remove the lower case.
Figure 41. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case
Remove the hard disk drive (HDD) module (for selected models)
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 56
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 42. Disconnect the battery pack cable from the system board
Step 2.
Disconnect the HDD cable from the system board. Remove four screws and then remove the HDD
module.
Number of screws
6
4
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
57