Remove the I/O board module
Make sure the following FRU (or CRU) have been removed.
"Remove the lower case" on page 56
"Remove the fan" on page 65
Step 1.
Remove two screws and then open the hinge.
Figure 60. Remove two screws and then open the hinge
Screw specifications
M2.5 x L5
Step 2.
Disconnect the I/O board cable from the system board. Remove one screw and then remove the I/
O board with cable.
Figure 61. Remove the I/ O board with cable
66
Hardware Maintenance Manual
Number of screws
2