Remove The Fan (For Lenovo V14 G4 Amn); Remove The Thermal Module (For Lenovo V14 G4 Ian) - Lenovo V14 Gen 4 i Hardware Maintenance Manual

Remove the fan (for Lenovo V14 G4 AMN)

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 38
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Disconnect the fan cable from the system board and then release the cable from the cable guide.
Figure 19. Disconnect the fan cable from the system board
Step 3. Remove three screws and then remove the fan.
Figure 20. Remove three screws and then remove the fan
Screw specifications
M2 x L5
Go to https://support.lenovo.com/partslookup
part:
Fan

Remove the thermal module (for Lenovo V14 G4 IAN)

Make sure the following FRU (or CRU) has been removed.
44
Hardware Maintenance Manual
Number of screws
3
to look up the Lenovo part number of the following replacement