Make Sure The Following Frus (Crus) Have Been Removed; Remove The Lcd Module; Remove The Lcd Bezel; Remove The Lcd Panel - Lenovo V14 Gen 4 i Hardware Maintenance Manual

Figure 73. Remove the microphone rubbers
Go to https://support.lenovo.com/partslookup
replacement parts:
Microphone rubbers
Removable tape
Remove the EDP cable

Make sure the following FRUs (CRUs) have been removed.

"Remove the LCD module" on page 69
"Remove the LCD bezel" on page 71
"Remove the LCD panel" on page 72
Step 1. Disconnect the EDP cable from the camera board and then remove the EDP cable.
Figure 74. Disconnect the EDP cable from the camera board and then remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
74
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following