Disassemble The Lcd Module; Remove The Hinge Cover; Remove The Lcd Bezel - Lenovo ThinkBook 13s Gen 4 Hardware Maintenance Manual

Hide thumbs Also See for ThinkBook 13s Gen 4:
Table of Contents

Advertisement

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.

Remove the hinge cover

Make sure the following unit has been removed.
"Remove the LCD module" on page 45
Step 1.
Remove the hinge cover.
Figure 36. Remove the hinge cover
Go to
https://support.lenovo.com/partslookup
part:
Hinge cover

Remove the LCD bezel

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the hinge cover" on page 47
Step 1.
Remove the LCD bezel.
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
47

Advertisement

Table of Contents
loading

Table of Contents