Make Sure The Following Frus (Crus) Have Been Removed - Lenovo V14 Gen 4 i Hardware Maintenance Manual

Hide thumbs Also See for V14 Gen 4 i:
Table of Contents

Advertisement

Figure 34. Remove six screws and then remove the hinges
Screw specifications
M2 x L2
Go to
https://support.lenovo.com/partslookup
part:
Hinges
Remove the LCD panel

Make sure the following FRUs (CRUs) have been removed.

"Remove the LCD module" on page 50
"Remove the LCD bezel" on page 52
Step 1.
Remove the two pieces of removable tape with tweezers.
Note: The removable tape is not reusable. Replace it when replacing related FRUs.
Figure 35. Remove the two pieces of removable tape with tweezers
Step 2.
Lift the LCD panel and then disconnect the EDP cable from the LCD panel.
Number of screws
6
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
53

Advertisement

Table of Contents
loading

Table of Contents