Stiga MP 84/98 Workshop Manual page 5

WORKSHOP MANUAL
MP 84/98 - MP 84/98 Hy
General informations
The use of outsourced third­party mechanic or
hydrostatic drive units is foreseen on this ma­
chine.
This manual only describes the operations relat­
ing to the application of the machine units; refer­
ence to the drive unit's Manufacturer's Manual is
recommended for information regarding servic­
ing, disassembly and replacement of compo­
nents.
Related topics
[ 1.1] Identification of components
INDEX OF FUNCTIONAL UNITS
Transmission - Brake - Wheels
RELATED TOPICS:
Adjustments and tuning
Brake adjustment .............................................................................
Drive belt adjustment ........................................................................
Drive pedal adjustment (
Removal of external parts and main assemblies
Removal of the rear axle (
Removal of the rear axle (
Repairs
Replacement of tyres and wheels ....................................................
Replacement of front wheel bearings ..............................................
Replacement of the drive belt ..........................................................
Replacement of the small wheels for the drive belt ..........................
Replacement of the brake pads and disc (
CHAPTER REVISION
ii
MP 84/98 Hy) .......................................
Peerless MST 205­535 E) ..................
Hydro­Gear T2­ADBF­2X3C­1RX1) ....
MP 84/98) ..............
FROM ... PAGE
0 2018 2 of 6
[ 4.2]
[ 4.3]
[ 4.4]
[ 5.6]
[ 5.6a]
[ 6.1]
[ 6.2]
[ 6.4]
[ 6.5]
[ 6.10]