Stiga MP 84/98 Workshop Manual page 28

WORKSHOP MANUAL
CHAPTER REVISION FROM ... PAGE
DRIVE PEDAL ADJUSTMENT
MP 84/98 - MP 84/98 Hy 4.4 0 2018 2 of 2
B) Adjusting the "neutral" position of the
micro switch
IMPORTANT This is a very important adjust­
ment for the correct operation of the safety devices
for starting and stopping of the machine during work.
The neutral position "N" is signalled by the mi cros-
witch (11) of the cam (12).
After checking that the adjustment "A" has been cor-
rectly completed, make sure that the pedal is re lea sed
and in neutral "N" then loosen the fastening screws
(13) of the microswitch and position it in line with the
tip of the cam, so that it stays pressed down.
13
11
12
By moving the pedal to the forward gear, neutral po si-
tion and reverse gear you should hear the click of the
button at each gear change before the wheels start
moving.