Stiga MP 84/98 Workshop Manual page 37

WORKSHOP MANUAL
MP 84/98 - MP 84/98 Hy
General informations:
The removal of side guards allows access to the
blades drive belt and cutting deck adjusting keys.
Related topics:
---
Tightening torques
3 - 4 - 5 Guards fastening screws ....... 8 ÷ 10 Nm
Map of functional units
REMOVAL OF THE SIDE GUARDS
(if provided)
Each guard (1 - right) or (2 - left) is fastened by:
– 1 top self-tapping screw (3),
– 1 front self-tapping screw (4),
– 1 rear self-tapping screw (5),
5 3 4
1
The front self-tapping screws (4) and rear (5) are held
with a ring gear fastener (6) that keeps them inserted
in the respective seats.
4 3
6
2
CHAPTER
5.2
3
6
IMPORTANT When assembling, ensure fas­
teners are used, being essential to allow disassembly
and reassembly of the guards by user, without jeop­
ardizing the safety of the machine.
5
REVISION FROM ... PAGE
0 2018 1 of 1