Stiga MP 84/98 Workshop Manual page 18

WORKSHOP MANUAL
MP 84/98 - MP 84/98 Hy
C) Crown fasteners
Some pin ends (6) are secured by crown fasteners
(7). During dismantling, these fasteners are always
da maged and lose their hold, so they should never
be reused.
On assembly, make sure it is inserted in the right di-
rection and push the fastener (7) onto the pin using
a pipe or socket spanner (8) with the right diameter,
so that it can be fitted without deforming the faste ner
"crown".
IMPORTANT A deformed fastener should always be
replaced.
6
7
PRACTICAL HINTS
8
7
6
CHAPTER REVISION FROM ...
2.4 0 2018
PAGE
2 of 2