Stiga MP 84/98 Workshop Manual page 11

WORKSHOP MANUAL
CHAPTER REVISION FROM ... PAGE
IDENTIFICATION AND PROCEDURES
MP 84/98 - MP 84/98 Hy 1.1 0 2018 2 of 2
C) Service repairs after guarantee period
The Service Centre has to make out a report contain-
ing the machine's serial number, a summary of the
problem, the repairs carried out and any spare parts
used for each repair done on the machine.
A copy of this report must be retained to be made
a vai la ble to the Manufacturer together with the parts
in ca se of any subsequent disputes with Customers.
D) Fault notification
The Manufacturer welcomes any notifications of faults
that recur with particular frequency. It gives the oppor-
tunity for a careful inspection of the problem and the
im plementation of corrective action at production le-
vel.
Similarly, the Manufacturer will notify of any faults
di scovered on the machines produced, with recom-
mendations for the most suitable procedures for their
re medy.
E) Spare parts request
When requesting spare parts, the code number must
be given, referring to the exploded charts for the year
of manufacture, shown on the identification label.