Connect Braking Units In Parallel - YASKAWA GA80U4720ABM Manual

7.
Tighten the nut to the specified torque.
8.
Attach the wiring cover and terminal block cover to their initial positions and tighten the screws on the terminal
block cover.
9.
Put the terminal cover back in its initial position.
◆

Connect Braking Units in Parallel

To connect two or more braking units in parallel, refer to
Braking units have connectors to select master or slave. On the first braking unit, select the master side. On the
second unit and all subsequent units, select the slave side.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference
Figure 3.70 Tighten the Terminal Block Nut
Figure 3.71 Reattach the Wiring Cover
Figure 3.72
Figure 3.72 Connect Braking Units in Parallel
3.9 Braking Resistor Installation
for wiring and connector selections.
3
115