Disable The Initial Setup Screen - YASKAWA GA80U4720ABM Manual

9.
Push or
The Setup Wizard procedure is complete.
◆

Disable the Initial Setup Screen

Do the steps in this procedure to not show the initial start-up screen when the drive is energized.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push (Menu).
3.
Push / to select [Initial Setup], then push
4.
Push / to select [Show Initial Setup Screen], then push
5.
Push / to select [No], then push
• [No]: The keypad will not show the Initial Setup Screen when the drive is energized.
• [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference
to select [Yes], then push
, push
.
(Back), and then push
.
.
.
4.6 Keypad Operation
to show [Home].
4
181