4.6 Keypad Operation
The configuration procedure is complete.
◆
Display Monitors as an Analog Gauge
The following explains how to display the contents selected for a monitor as an analog gauge.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on
2.
Push
(Menu).
3.
Push
or
4.
Push
or
It will be displayed as follows.
◆
Set Monitoring Items to be Shown as a Trend Plot
You must set the items in this figure to display as a trend plot.
158
, push
(Back) to show [Home] on
to select [Monitors], then push
to select [Analog Gauge], then push
.
.
.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference