4.6 Keypad Operation
9.
When you are done changing the value, push
The parameter revision procedure is complete.
◆
Restore Modified Parameters to Defaults
This procedure will set all parameters with changed values to their default settings.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
.
172
, push
(Back) to show [Home] on
to select [Modified Param / Fault Log], then push
to select [Modified Parameters], then push
.
.
.
.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference