Installation Position And Distance - YASKAWA GA80U4720ABM Manual

2.3

Installation Position and Distance

Install the drive vertically for sufficient airflow to cool the drive.
Note:
Contact Yaskawa or a Yaskawa representative for more information about installing drive models on their side.
A - Vertical installation
◆
Single Drive Installation
Use the clearances specified in
airflow to cool the drive.
A - 50 mm (2 in) minimum
B - 30 mm (1.2 in) minimum on both
sides
◆
Install Drives Side-by-Side
Users can install drive models 2004xB to 2082xB and 4002xB to 4044xB side-by-side.
When you install other drives side-by-side, keep the space that is sufficient for single drive installation between the
drives.
Side-by-side installation requires the installation space shown in
Selection = Side-by-Side Mounting].
With reference to Derating Depending on Ambient Temperature on page
temperature.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference
Figure 2.1 Installation Orientation
Figure 2.2 to install the drive. Make sure that there is sufficient space for wiring and
Figure 2.2 Installation Distances for One Drive

2.3 Installation Position and Distance

B - Horizontal installation
C - 120 mm (4.7 in) minimum above
and below
D - Airflow direction
Figure 2.3. Set L8-35 = 1 [Installation Method
450, set derating depending on ambient
2
35