Table of Contents
Advertisement
Command Reference
MEPK is the peak (largest) magnitude error in %pk units.MEPS is the symbol number at which
the peak (largest) magnitude error occurred.
PBIT is the number of pilot bits detected in the DCPH for the selected channel and code
layer (Option 080).
PERM is phase error in degrees-rms units.
PEPK is the peak (largest) phase error in degrees-pk.
PEPS is the symbol number at which the peak (largest) phase error occurred.
PLEV is the VSB pilot level.
RHO is the modulation accuracy.
RHOE is a Wideband CDMA parameter that shows the estimation of RHO for the W-CDMA
composite signal.
SLOT is a Wideband CDMA parameter that shows the slot number associated with the start of
the displayed result.
SNR is the signal-to-noise ratio.
TDPC is the tDPCH timing value for the DPCH for the selected channel and code
layer (Option 080)
TFRM is a Wideband CDMA parameter that shows the selected code channel offset, T
Frame
.
(option B73 or B79)
TSLT is a Wideband CDMA parameter that shows the selected code channel offset, T
Slot(option
.
(options B73 or B79)
TTRG is a Wideband CDMA parameter that shows the amount of time, in chips, from the trigger
to the start of the sync symbol.
For more information, see online help (press the [ Help ] key on the front panel, then press the
softkey of interest) and see the concepts discussion in the Operator's Guide.
67
Advertisement
Table of Contents
