[Sense:]Ddemod:qam:nstate - Agilent Technologies 89400 Series Command Reference Manual

[SENSe:]DDEMod:QAM:NSTate

Specifies the number of states in the QAM modulation format.
Command Syntax:
[SENSe:]DDEMod:QAM:NSTate <number>|<step>|<bound>
<number>
<step>
<bound>
Example Statements:
OUTPUT 719;"SENSE:DDEM:QAM:NST 16"
OUTPUT 719;"ddem:qam:nst 32"
Query Syntax:
[SENSe:]DDEMod:QAM:NSTate?
Return Format:
Integer
Attribute Summary:
Option:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
Use this command to select the number of states for the QAM modulation format. Valid values
are 16 or 32. If you have option AYH, you can also specify 64 or 256.
To select the QAM modulation format, use DDEM:FORMAT QAM.
For additional information on digital demodulation or video demodulation, see the Operator's
Guide.
::= a real number (NRf data)
limits: 16:256
::= UP|DOWN
::= MAX|MIN
AYA and, for 64 or 256 QAM, option AYH (see below)
not affected by Preset
instrument-specific
no
Command Reference
command/query
307