Table of Contents
Advertisement
Command Reference
[SENSe:]TCAPture[1|2]:STARt
Specifies the position in the time capture buffer to begin analysis.
Command Syntax:
[SENSe:]TCAPture[1|2]:STARt <param>
<param>
<number>
<unit>
<step>
<bound>
Example Statements:
OUTPUT 719;":TCAP2:START 0"
OUTPUT 719;"sens:tcapture:star 0"
Query Syntax:
[SENSe:]TCAPture[1|2]:STARt?
Return Format:
Real
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
Related Commands:
To specify the end of the time capture data on which to performa analysis, use TCAP:STOP.
To begin filling the time capture buffer(s), use TCAP.
To specify the size of the time capture in points, use TCAP:LENG.
366
::= <number>[<unit>]|<step>|<bound>
::= a real number (NRf data)
limits: (depends on configuration)
::= S|POINTS|RECORDS
::= UP|DOWN
::= MAX|MIN
0 (seconds)
instrument-specific
no
command/query
Advertisement
Table of Contents
