Table of Contents
Advertisement
STATus:QUEStionable:VOLTage:ENABle
Sets and queries bits in the Questionable Voltage Enable register.
Command Syntax:
STATus:QUEStionable:VOLTage:ENABle <number>
<number>
Example Statements:
OUTPUT 719;"Stat:Questionable:Volt:Enable 5"
OUTPUT 719;"STAT:QUES:VOLTAGE:ENAB 23"
Query Syntax:
STATus:QUEStionable:VOLTage:ENABle?
Return Format:
Integer
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
To set a single bit in the Questionable Voltage Enable register to 1, send the bit's decimal weight
with this command. To set more than one bit to 1, send the sum of the decimal weights of all the
bits. (The decimal weight of a bit is 2
All bits are initialized to 0 when the analyzer is turned on. However, the current bit setting is not
modified by the *RST command.
See ''Questionable Voltage Register Set'' for a definition of bits in the register set. See ''General
Status Register Model'' for information about the role of enable registers in register sets.
::= a real number (NRf data)
limits: 0:32767
not affected by Preset
confirmed
n
, where n is the bit number.)
no
Command Reference
command/query
415
Advertisement
Table of Contents
