Table of Contents
Advertisement
Error
Error Message
Number
-200
"Value limited by Time Capture RAM, set to limit. For details, see online help for the [search length] softkey."
-200
"Value out of range, set to limit. Maximum span limited by symbol rate and maximum span/symbol rate ratio. See
[System Utility] → [memory usage] to set the 'max span/symR' ratio."
-200
"Value out of range, set to limit. Minimum span limited by symbol rate."
"Value out of range, set to limit. See [System Utility] → [memory usage] to set the 'max time points' limit and/or 'max
-200
span/symR' ratio."
"Value out of range, set to limit. See [System Utility] → [memory usage] to set the 'max time points' limit."
-200
"Value out of range, set to limit. See [System Utility] → [memory usage] to set the maximum limit."
-200
-200
"Value out of range, set to limit. Sync offset limited to maintain sync pattern length within search length."
-200
"Value out of range, set to limit."
"Warning: Input Time exceeds 'max time points' and will be truncated. See [System Utility] → [memory usage] to set
-200
the 'max time points' limit."
-200
"Warning: Insufficient memory. Trace buffer truncated to %d scans."
-200
"Warning: Math data results truncated."
-220
"Parameter error"
-221
"%s memory configuration cannot be changed unless the IBASIC memory size is 0. IBASIC can be redefined after the
%s configuration is complete."
-221
"Capture functionality is not available in Scalar instrument mode."
-221
"Duplicate state detected in %s definition."
-221
"Feature is disabled until the instrument is powered up with LAN active."
-221
"Invalid domain for marker operation."
-221
"Invalid program state change requested."
-221
"Marker is not on."
-221
"Multiple overlaid waterfall/spectrograms not allowed."
-221
"Offset marker is not on."
-221
"Peak hold averaging valid only for spectrum, PSD, and time measurement data."
-221
"Register data not compatible with user defined filtering."
-221
"Request not supported with selected device."
-221
"Resolution bandwidth limited by maximum time record length."
-221
"Resolution bandwidth limited by minimum time record length."
-221
"Scalar instrument mode is not available when capture is on."
Appendix A
Error Messages
471
Advertisement
Table of Contents
