Calculate:x:unit:pow - Agilent Technologies 89400 Series Command Reference Manual

Command Reference
CALCulate[1|2|3|4]:X:UNIT:POW
Specifies the default x-axis units when the x axis is the code domain.
Command Syntax:
CALCulate[1|2|3|4]:X:UNIT:POW DB
Example Statements:
OUTPUT 719;":calc4:x:unit:pow Db"
OUTPUT 719;"Calc2:X:Unit:Pow Db"
Query Syntax:
CALCulate[1|2|3|4]:X:UNIT:POW?
Return Format:
CHAR
Attribute Summary:
Option:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
The UNIT subsystem is used to change default parameter units. The specified units apply to both
the command and query. The only units you can specify are DB, which are the default units.
124
B73 (Wideband CDMA Analysis)
no
CODE
instrument-specific
command/query