Table of Contents
Advertisement
Error
Error Message
Number
-200
"Function definition is not valid."
-200
"Function definition is too long."
-200
"Function definition may not reference higher numbered functions."
-200
"General Export Option Installed. Command not allowed."
-200
"GPIB control received without requesting it."
-200
"GPIB control was not received."
-200
"Instrument BASIC is not installed."
-200
"Instrument mode must be Vector to measure from capture."
"Insufficient memory for %s on trace %s. %s limited to %d scans. Use [System Utility] → [memory usage] →
-200
[remove trace buffers] to reclaim all available memory."
"Insufficient memory for this instrument mode. See [System Utility] → [memory usage] to free more memory."
-200
-200
"Insufficient memory. Max freq points and/or max time points adjusted."
-200
"Invalid X11 display IP address"
-200
"Invalid date entered. Date unchanged."
-200
"Invalid function code"
-200
"Invalid instrument state"
-200
"Marker value is not valid."
-200
"Meas Restart, Pause or Continue received while capture in progress. Abort capture first."
-200
"No capture data for channel %d."
-200
"No capture data."
-200
"No more applications allowed."
-200
"Not a valid serial number"
-200
"Not enough capture data for any measurement result."
-200
"Offset freq is a display only paramater in external IF input mode."
-200
"Offset value of 0 is not allowed."
-200
"Option is not installed."
-200
"Plot/print is already in progress."
-200
"Printer/plotter is not on line."
-200
"Printer/plotter out of paper."
-200
"Printer/plotter reports error."
Appendix A
Error Messages
469
Advertisement
Table of Contents
