Table of Contents
Advertisement
CALCulate[1|2|3|4]:UNIT:TIME
Specifies the default y-axis units for time measurements.
Command Syntax:
CALCulate[1|2|3|4]:UNIT:TIME S
Example Statements:
OUTPUT 719;":Calc2:Unit:Time S"
OUTPUT 719;"CALC3:UNIT:TIME S"
Query Syntax:
CALCulate[1|2|3|4]:UNIT:TIME?
Return Format:
CHAR
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
The UNIT subsystem is used to change default parameter units. The specified units apply to both
the command and query. Default units are temporarily overridden by using other (compatible)
units as a suffix to a command parameter, as when uV are sent while the default is V.
The Y-axis units are time when the data format is group delay. The list of time units consists of
one entry; seconds. It is provided for consistency in program queries written to determine
whether units of seconds, minutes, hours, days, weeks, ... are default.
Unit queries must be in the current "family" of units. For example, the CALC:UNIT:ANGLE?
query should be used only when the default Y-axis units are known to be one of the units in the
ANGLE units list.
The numbers 1 through 4 used with the CALCulate node specify which trace (A, B, C, or D) is to
be affected by the command. If no number is used in the command line, "CALC1" is assumed and
the command affects trace A.
no
S (seconds)
instrument-specific
Command Reference
command/query
119
Advertisement
Table of Contents
