Installing the A6829A Adapter
Specifying SCSI Parameters
Are you sure you want to exit?
<Cancel Exit>
Save changes then exit this menu
Discard changes then exit this menu
<Exit the Configuration Utility>
Use the arrow keys to highlight your selection from the listed choices,
and then press the [ENTER] key to return to the EFI shell prompt.
Step 9. At the EFI shell prompt, issue the following command to reboot the
system:
reset
NOTE
The system reboot is required for the new setting to take effect.
52
Get other manuals https://www.bkmanuals.com
Chapter 2