HP A6829A User's Manual And Service Manual page 46

Installing the A6829A Adapter
Specifying SCSI Parameters
PCI DEVICE INFORMATION
Description
-----------
.
.
SCSI bus cntlr
SCSI bus cntlr
.
.
Step 3. Display (and optionally change) the HBA's maximum data transfer rate
by performing the following steps:
a. If you are already at the "Main Menu," type ser (for "Service Menu");
b. In the "Service Menu," type the following command:
scsi path rate
Path (dec)
-----------------
0/0/10/0/0
32
Path Bus
(dec) #
----- ---
0/0/10/0/0 80
0/0/10/0/1 80
In this example, the HBA's path is 0/0/10/0/0 and 0/0/10/0/1
(shown in bold in the listing above, for highlighting purposes). Note
that the last (farthest right) digit is the channel number—0 for
channel A, and 1 for channel B.
go to step b.
If you are not at the "Main Menu," type main (to return to the "Main
Menu"), type ser (for "Service Menu"), and then go to step b.
where path is the HBA's path (from step 1).
Therefore, using the information for channel A of the HBA in the
example in step 1, type the following:
scsi 0/0/10/0/0 rate
This displays the HBA's maximum data transfer rate. The output is
as follows:
Initiator ID SCSI Rate
------------ ---------
7 MAX
Get other manuals https://www.bkmanuals.com
Slot Vendor
# Id
------ ------
2 0x1000
2 0x1000
Auto Term Bus Width
--------- ---------
ON MAX
Device
Id
------
0x0021
0x0021
Chapter 2