HP A6829A User's Manual And Service Manual page 96

Troubleshooting
Setting and Confirming SCSI Parameters
LSI Logic Host Bus Adapters
Adapter
<53C875
Press the [Enter] key. This displays the Adapter Properties screen
containing the controller (HBA) settings; refer to the following example:
Adapter Properties
Adapter
53C875
Use the arrow keys to highlight the different SCSI parameters.
Use the plus (+) and minus (-) keys to change the highlighted SCSI
parameter.
NOTE Modify only the Host SCSI ID and the Secondary Cluster Server
parameters, if necessary.
Set the Secondary Cluster Server to Yes if more than one initiator is
connected to the SCSI bus.
Do not change the default values of other SCSI parameters listed on the
screen.
82
PCI PCI PCI
Bus Device Function
60 01 01>
PCI PCI PCI
Bus Device Function
60 01 01
<Device Properties>
Boot Support
SCSI Parity
Host SCSI ID
SCSI Bus Scan Order
Spinup Delay (Secs)
Secondary Cluster Server
Termination Control
<Restore Defaults>
Get other manuals https://www.bkmanuals.com
IRQ NVM LSI Logic
Control
0 Yes Enabled
[Enabled]
[Yes]
[ 5]
[Low to High (0..Max)]
[ 2]
[Yes]
[Auto]
Chapter 3