HP A6829A User's Manual And Service Manual page 69

If you need to install one or more patches, go to step 2.
Step 2. Install any necessary patches.
Step 3. Follow the normal procedure to install the appropriate software bundle
for your HP-UX system's OS or OE.
Step 4. Issue the swlist command to ensure that the necessary patches and the
c8xx driver are present.
Step 5. Check to see if the c8xx driver is loaded in the kernel, by doing one of the
following two things:
•
•
If the driver is in the kernel, go to the section, "Configuring LUN 0" on
page 55.
If the driver is not in the kernel, go to step 6
Step 6. Load the c8xx driver into the kernel through SAM:
a. Select the "Kernel Configuration" icon.
b. Select the "Drivers" icon.
c. In the "Kernel Configuration" screen, follow the normal steps for
NOTE You need to reboot the system after completing these steps.
Once you have confirmed that the c8xx driver is in the kernel, go to
section, "Configuring LUN 0" on page 55.
Chapter 2
Use SAM, as follows:
1. Select the "Kernel Configuration" icon.
2. Select the "Drivers" icon.
3. In the "Kernel Configuration" screen, check to see if the c8xx
driver is in the kernel.
Issue the following command:
what /stand/vmunix | grep scsi_c8xx.c
Check to see if the c8xx driver is listed.
loading the driver into the kernel (and building a new kernel).
Get other manuals https://www.bkmanuals.com
Installing the A6829A Adapter
Installing the SCSI Driver
55